Thank you for registering!
B9 Core Series Latest Installer - Firmware 93
To update to the latest firmware, download the installer below onto a USB and upload to your printer. Full instructions are here.
PLEASE READ: For both B9Create 1.0 and 2.0 users, before trying to load the newest firmware, make sure you have plenty of room on your printer by removing previous prints. Please remove all files larger than 100 mb from your printer library prior to updating your firmware. Contact support@b9c.com if you have questions.
If you have purchased, converted, upgraded, or RMA'd your printer during or after August 2021, download the installer here:
If you do not meet that criteria, please use this link:
Download B9Create Software for the B9 Core Series.
B9 Core Series - B9Create 1.0 for Windows
Minimum - Specs Windows 7 or higher
Previous Version
B9 Core Series - B9Create for OS X
Recommended - Mac 0S 10.10 or higher
Previous Version
B9 Core Series - FAST™ Powered by B9Create 2.0 Pioneer Edition
Required - Windows 10 or higher
Not compatible with Mac OS