Unable to start projector.

- Installation
- Operation
- Troubleshooting
NFJewelry
Newbie
Newbie
Posts: 6

Unable to start projector.

Post#1 » Thu Dec 07, 2017 3:04 pm

Recently when I start a new build on my 1.2 the software hangs at starting the projector. With no other buttons available I end the task using the task manager and try again. Sometimes it will take up to 3 times doing this for the projector to start and print as normal. Any help would be appreciated.

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6416

Re: Unable to start projector.

Post#2 » Thu Dec 07, 2017 8:26 pm

Unplug the power cord to the projector and wait, then plug it back in. This will reboot the projector internally. Has worked for me in the past when things get a little wonky. Same thing the cable company tells u to try first on your cable box.

Robert Howle
Dance like nobody's watching!

User avatar
Metalcaster
B9 Wizard
B9 Wizard
Posts: 1250
Contact:

Re: Unable to start projector.

Post#3 » Fri Dec 08, 2017 11:18 am

when you start the print, if the green light does not flash in 3 seconds on the projector, press the bottom of the button on the projector and that will start the projector.
This happens 40% of the time with my 2 projectors.
There has been no fix for this.

Return to “Software”

Who is online

Users browsing this forum: No registered users and 0 guests

cron
Creations
X CLOSE
Discover the Creations
made 
by customers and partners.

more on

Close Menu Shop Forum