Grid perfect but Print fails

B9Creator - Ideas and Discussions
V Jewels
B9 Maker
B9 Maker
Posts: 171

Re: Grid perfect but Print fails

Post#21 » Sun Dec 18, 2016 10:22 pm

Hi Robert,
Pls send a pre sliced file, no problems with 30xy & 30z.
Rishi

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6067

Re: Grid perfect but Print fails

Post#22 » Sun Dec 18, 2016 11:16 pm

Very busy with christmas work. But will try to send Monday.

Send me your email

howlere@gmail.com

Robert
Dance like nobody's watching!

V Jewels
B9 Maker
B9 Maker
Posts: 171

Re: Grid perfect but Print fails

Post#23 » Mon Jan 02, 2017 3:49 am

Hi Robert,
Pls send me a file to print, as am unable to print... Thanks...

User avatar
Robert Howle
B9 Creator
B9 Creator
Posts: 6067

Re: Grid perfect but Print fails

Post#24 » Mon Jan 02, 2017 11:02 am

you need to print the calibration file for your xy and z I will send the 30 and 30 file.

Robert
Dance like nobody's watching!

V Jewels
B9 Maker
B9 Maker
Posts: 171

Re: Grid perfect but Print fails

Post#25 » Tue Jan 10, 2017 1:06 am

Hi, my machine has been dead for months now.... can anyone pls help me...
Am able to print the grid perfect.... images uploaded in this thread already... but
none of the pcs are getting printed...
Pls help.

User avatar
akgold
B9 Wizard
B9 Wizard
Posts: 1801

Re: Grid perfect but Print fails

Post#26 » Tue Jan 10, 2017 1:25 pm

V Jewels wrote:Hi, my machine has been dead for months now.... can anyone pls help me...
Am able to print the grid perfect.... images uploaded in this thread already... but
none of the pcs are getting printed...
Pls help.


Where are you located?

V Jewels
B9 Maker
B9 Maker
Posts: 171

Re: Grid perfect but Print fails

Post#27 » Tue Jan 10, 2017 9:55 pm

New Delhi, India

User avatar
mikej
B9 Moderator
B9 Moderator
Posts: 4095
Contact:

Re: Grid perfect but Print fails

Post#28 » Wed Jan 11, 2017 1:13 am

If the calibration file prints OK but the models fail to grow from supports it could be an indication that the MSM is still a bit too low or the image is not sharply focused.
Measure Twice, Cut Once.

User avatar
Metalcaster
B9 Wizard
B9 Wizard
Posts: 1108
Contact:

Re: Grid perfect but Print fails

Post#29 » Wed Jan 11, 2017 8:40 am

Could also be the resin ... if you don't shake it really hard when it is new and you just use it without shaking, you may end up with a weaker resin... First Raise your MSM a little as Mike suggested ...if that does not work enough, try fresh very well shaken resin. If the fresh resin works, then add a little bit of the old resin to fresh resin so you can use it up.
I think the msm will probably do it.

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 3 guests

Products
X CLOSE
 

 Printers

  Accessories

  Materials

Close Menu Products Forum